Thermo King Precedent C-600M, Operator'S Manual

Page: 133 / 166

Alarm Codes
131
105 Check Receiver Tank Pressure
Solenoid Circuit
If unit is shutdown, repair immediately. Otherwise, report alarm at
end of day.
X
106 Check Purge Valve Circuit
If unit is shutdown, repair immediately. Otherwise, report alarm at
end of day.
X
107 Check Condenser Inlet Solenoid
Circuit
If unit is shutdown, repair immediately. Otherwise, report alarm at
end of day.
X
108 Door Open Time-out (Zone) Close Doors. Report alarm at end of day. X
110 Check Suction Line Solenoid Circuit If unit is shutdown, repair immediately. Otherwise, report alarm at
end of day.
X
111 Unit Not Configured Correctly (Zone) Report alarm at end of day. X
112 Check Remote Fans (Zone)
If unit is shutdown, repair immediately. Otherwise, report alarm at
end of day.
X
113 Check Electric Heat Circuit (Zone) Manually monitor temperature. Report alarm at end of day. X
114 Multiple Alarms - Can not Run Unit/zone cannot operate and is shut down. Repair immediately. X
117 Auto switch from Diesel to Electric Report alarm at end of day. X
Table of Alarm Codes (Continued)
Code Description Operator Action
Level Of
Action
Ok
T
o
Run Check Sh
ut
Dow
n