Operating Instructions
64
•
Report Test Results - When the Pretrip Test is completed
the test results are reported as PASS, CHECK or FAIL. If
test results are CHECK or FAIL alarm codes will exist to
direct the technician to the source of the problem.
Performing a Pretrip Test
If a Pretrip Test is initiated with the engine shut down a Full
Pretrip Test will be performed. If a Pretrip Test is initiated with
the engine or motor running a Running Pretrip Test is
performed.
•
Before initiating a Pretrip Test, clear all alarm codes.
•
To stop a Pretrip Test at any time turn the unit off.
Pretrip Tests are initiated using the Pretrip Menu (or the Pretrip
Key if present). From the Standard Display, press the MENU
Key (Figure 53).
Figure 53: Pretrip Initiated - MENU Key
NOTE: If the Pretrip Key is used to start a Pretrip Test, the
Main Menu is not shown when the key is pressed. The display
will show [Programming Pretrip Mode] as shown in Figure
55.
The Main Menu will appear. Press the UP or DOWN Key as
required to choose the Pretrip Menu. When the Pretrip Menu is
shown press the SELECT Key to start a Pretrip Test (Figure
54).
Summary of Contents for Precedent C-600M
