Operating Instructions
39
On Key:
The ON Hard Key is used to turn the
unit on. First the display will briefly show the
Thermo King Logo and then the statement
"Configuring System - Please Wait". When the
power-up sequence is complete th display shows
the Standard Display of box temperature and
setpoint. For more information see “Turning the
Unit On and Off" later in this section
Off Key:
The OFF Hard Key is used to turn the
unit off. First the display will briefly show
"System is Powering Down - Please Wait. Press
On to Resume" and then "Off" will appear
momentarily. When the power-down sequence is
complete the display will be blank. For more
information see "Turning the Unit On and Off"
later in this chapter.
Defrost Key:
The DEFROST Hard Key is used
to initiate a manual defrost cycle. For more
information see "Initiating a Manual Defrost
Cycle" later in this chapter.
CYCLE SENTRY:
Used to select Cycle Sentry
Mode or Continuous Mode operation if allowed
by OptiSet Plus. For more information see
“Selecting Cycle Sentry or Continuous Mode”
later in this chapter.
IMPORTANT: If the Hard Keys are lighted the HMI Control
Panel is powered up, even if the display is off. Typically, this
indicates the CargoWatch Data Logger is active, even when
the unit is turned off.
Soft Keys
Figure 11: Soft Keys
ON
OFF
Summary of Contents for Precedent C-600M
