Operating Instructions
99
Turn Cycle Sentry On or Off
Cycle Sentry can be turned on and off either by using the Cycle
Sentry hard key at the lower right side of the display or from
the Main Menu.
IMPORTANT: If the unit is in Cycle Sentry Null and the
mode is switched to Continuous Mode, the unit will start
automatically.
If the unit is operating in Cycle Sentry Mode, the Cycle Sentry
Icon will be present in the upper right corner of the display as
shown in Figure 103. If the Cycle Sentry Icon is not present the
unit is operating in Continuous Mode.
Figure 103: Cycle Sentry Icon
Using the Cycle Sentry Key
If allowed by OptiSet Plus, Cycle Sentry Mode or Continuous
Mode is selected by pressing the Cycle Sentry Key as shown in
Figure 104.
Figure 104: Cycle Sentry Key
Using the Main Menu
From the Main Menu > Change Mode menu choose Turn
On/Off Cycle Sentry Mode and press the SELECT Soft Key.
Summary of Contents for Precedent C-600M
