![background image](http://html1.mh-extra.com/html/thermo-king/precedent-c-600m/precedent-c-600m_operators-manual_1104347129.webp)
Alarm Codes
127
37
Check Engine Coolant Level
Check engine coolant level. Do not remove the cap if the engine is
hot. Report alarm at end of day.
X
38
Electric Phase Reversed
If unit is shutdown, repair immediately. Otherwise, report alarm at
end of day.
X
40
Check High Speed Circuit
If unit is shutdown, repair immediately. Otherwise, report alarm at
end of day.
X
41
Check Engine Coolant Temperature If unit is shutdown, repair immediately. Otherwise, report alarm at
end of day.
X
42
Unit Forced to Low Speed
Report alarm at end of day.
X
43
Unit Forced to Low Speed
Modulation
Report alarm at end of day.
X
44
Check Fuel System
Add fuel as necessary. Report alarm at end of day.
X
45
Check Hot Gas or Hot Gas Bypass
Circuit
If unit is shutdown repair immediately. Otherwise, report alarm at
end of day.
X
46
Check Air Flow
Manually monitor temperature. Report alarm at end of the day.
X
Table of Alarm Codes (Continued)
Code Description
Operator Action
Level Of
Action
Ok
T
o
Run
Check
Sh
ut
Dow
n
Summary of Contents for Precedent C-600M
