Thermo King Precedent C-600M, Operator'S Manual

Page: 47 / 166

Operating Instructions
45
numbers allow unit conditions to be checked from a distance.
Pressing any soft key returns the display to the Standard
Display.
Figure 20: Two Zone TemperatureWatch ® Display
If an alarm condition (other than a Log Alarm) is present the
TemperatureWatch Display will not appear. If an alarm
condition occurs while the TemperatureWatch Display is
present the display will return to the Standard Display. If the
Defrost or Cycle Sentry keys are pressed the display will return
to the TemperatureWatch Display after defrost is initiated or
the operating mode is changed.
In the Three Zone TemperatureWatch display the Menu soft
key label covers the Zone 3 label as shown in Figure 21.
Figure 21: Three Zone TemperatureWatch® Display
If the unit is operating in Cycle Sentry mode the Cycle Sentry
icon will appear near Zone 2 as shown above. If the unit is
operating in Continuous Mode the Cycle Sentry icon will not
be present.
Changing the Setpoint
If the TemperatureWatch display is shown, press any soft key
to return to the Standard Display. From the Standard Display,
press the ZONE soft key for the desired zone. ZONE 1 is
shown below.