Operating Instructions
97
Mode
The Mode Menu allows the operator to change the unit
operating modes that have been enabled in Guarded Access.
Only Operating Modes that have been enabled from the
Guarded Access > Main Menu Configuration Menu will be
shown.
•
Turns Off Cycle Sentry Mode/Turns On Cycle Sentry
Mode (If Cycle Sentry is turned Off unit runs in
Continuous). Note that selecting Cycle Sentry Mode or
Continuous Mode can also be accomplished using the
Cycle Sentry Hard Key to the right of the display.
•
Allows Single Zone Control to be selected (if enabled
from the Guarded Access > Main Menu Configuration
Menu).
•
Allows temperatures to be displayed in either Fahrenheit
or Celsius degrees (if enabled from the Guarded Access >
Main Menu Configuration Menu).
•
Allows Keypad Lockout to be selected (if enabled from
the Guarded Access > Main Menu Configuration Menu).
•
Allows Sleep Mode to be set up and started (if enabled
from the Guarded Access > Main Menu Configuration
Menu).
When shipped from the factory, only the Cycle
Sentry/Continuous Mode feature is enabled.
To return to the Main Menu press the EXIT Key. To return to
the Standard display press the EXIT Key again.
Using the Change Mode Menu
Mode changes are made using the Mode Menu. From the
Standard Display, press the MENU Key (Figure 100).
Figure 100: MENU Key
Summary of Contents for Precedent C-600M
