Serial Interface
64
HAAKE Phoenix II P1
Version 3.07
19.7 Sets of commands
For the communication there are three different sets of com-
mands. Commands of the different sets can be combined at
will.
•
Standard set of commands
•
Extended set of commands
•
Set of commands according to NAMUR.
In the following table a blank is represented by a
” _ ”,
for example ”R_V1” or ”S__
<value>
”
Every command must be confirmed with
<cr>
.
For all three sets of commands there is no differ-
ence between upper case and lower case letters.
I.e. there is no difference between entering ”start”,
”Start”, ”START” or ”StArT”.
In case of the ”standard set of commands” be sure
to keep the right number of digits when entering a
value.
In case of the ”extended set of commands” and the
”set of commands acc. to NAMUR”, empty places
need not be filled with ”0” (in contrast with the
”standard set of commands”).
Standard set of commands:
If you have already controlled a circulator HAAKE DC50 via
the PC you can use the same set of commands for the circu-
lators of the Phoenix II line.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
