Test Certificate
9
HAAKE Phoenix II P1
Version 3.07
4. Thermo Electron (Karlsruhe)
Test Certificate for HAAKE Phoenix II P1
This is to certify that the tempering device which you have
acquired and to which these instructions for operation refer
has been tested and equilibrated by Thermo Electron (Karls-
ruhe) GmbH in compliance with the regulations of a certified
Quality Assurance System according to DIN ISO 9001.
Testing for constancy of temperature has been carried out in
keeping with DIN standard DIN 12876 for laboratory equip-
ment. (follow--up standard to DIN standard 58966).
The measuring equipment used in the testing process is re-
gularly calibrated and can be traced back to the national
norms of the Physikalisch Technische Bundesanstalt (PTB)
Deutschlands
1
or to other national norms. In those cases
where there are no norms and standards on a national level,
the testing process is in keeping with currently valid technical
rules and regulations, norms and standards.
All required measuring data are listed on this page of the Test
Certificate.
Measuring conditions
Ambient temperature:
+ 20
°
C
Power supply / --frequency:
230V
±
5V / 50 Hz
respectively
115V
±
5V / 60Hz
System parameters
Volume:
8 litre
Liquid:
Water
Rated temperature:
+70
°
C
Measuring process
Checking constancy of temperature in bath according to
DIN 12876, part 2 (follow-up standard to DIN 58966, part 2,
paragraph 4.3)
Measuring agent
Type of sensor used for measuring
according to DIN IEC 751
Test results
Constancy of temperature (Width of control range)
Accuracy at +70
°
C
The individual test certificate for your thermostat will be pro-
vided upon request.
We and our partners shall gladly be at your disposal for
a calibration of your thermostat at your premises. Just
contact us.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
