Thermann TH28ENR6L, Installer Manual

Page: 13 / 52

Do Not Use Equipment for Purposes Other Than Those Specified
• Do not use for other than increasing the temperature of the water supply, as unexpected accidents
may occur as a result.
Check Water Supply Quality
• If the water supply is hard, acidic or otherwise impure, treat the water with approved methods in
order to ensure full warranty coverage.
See water quality statement on page 36.
Frost Protection
• When installed, power to the unit must be kept switched on, otherwise the appliance should be
drained.
This prevents water freezing, and causing damage to the water heater.
WARNING
CAUTION
For NG Gas
Before Installation
xx
xxxxxxxx
xx
xx xx
xx
Check the Gas
• Check that the data label (Side of casing).
• Check that the gas supply line is sized for
TH50ECR6N, TH50ECR6L: 328 MJ/hr, 328 MJ/hr
TH32ECR6N, TH32ECR6L: 217 MJ/hr, 217 MJ/hr
TH28ENR6N, TH28ENR6L: 220 MJ/hr, 220 MJ/hr
• DO NOT OPERATE WITH ANY OTHER GAS TYPE.
Check the Power
• The power supply required is 230 - 240VAC, at 50Hz.
Using the incorrect voltage may result in fire or
electric shock.
Warning labels
• Located on the side of the casing -PLEASE READ THESE LABELS CAREFULLY!
13