P:
0800 357 1233
E:
W:
www.centralheating.co.nz
Radiatori 2000 Plus
Assembly Guide
Before Assembly
ASSEMBLY PREPARATION
Place all parts on a flat surface.
Ensure all machined faces and internal threads are clean.
PARTS REQUIRED
There are two joints to be made for each pair of sections. Each
requires one connection nipple and one gasket. A nipple key and
tommy bar are required to rotate and tighten the connections.
CONNECTIONS
Each section has right-handed connections at one end and left-handed
ones at the other. Nipples have one end left handed and one right
handed. Determine the orientation of connections before assembly.
Assembly
ATTACHING THE NIPPLES TO THE FIRST SECTION
Screw a pair of nipples into one end of the radiator.
Only screw in by one turn, do not screw in fully.
Place a gasket approximately at the mid-point of each nipple.
Do not use any jointing paste or tape (PTFE or similar) to the
gasket, nipple threads or radiator.