Thermann TH28ENR6L, Installer Manual

Page: 20 / 52

Thermann Installer's Manual
Gas Continuous Flow Water Heaters
Illustration Check
4. Drill holes for the remaining six screws.
5. Hang the unit again by the first screw, and then
insert and tighten the remaining six screws.
6. Take waterproofing measures so that water does
not enter the building from screws mounting the
device.
• Make sure the unit is installed securely so that it will
not fall or move due to vibrations or earthquakes.
1. Drill a single screw hole, making sure to hit a stud.
2. Insert and tighten the screw and hang the unit by the
upper wall mounting bracket.
3. Determine the positions for the remaining six screws
(four for the top bracket and two for the bottom), and
remove the unit.
Locating Scr
ew Holes
Mounting
Structur
e
• When installing with bare hands, take caution to not
inflict injury.
• Be careful not to hit electrical wiring, gas, or water
piping while drilling holes.
Item
CAUTION
Mounting Bracket
(upper)
Anchoring Screw
Location of Screw Hole
Locating Screw Holes
TH50ECR6 series
20