Themis RES-XR4-1U, Installation Manual

Page: 9 / 198

vii
Themis Computer
RES-XR4-1U Installation Manual
Safety Instructions
not allow yourself to be exposed to this radiation.
The laser system meets the code of Federal Regulations 21 CFR,1040 for the USA
and Canadian Radiation Emitting Devices Act, REDR C 1370.
Electrostatic Discharge (ESD)
A sudden discharge of electrostatic electricity can destroy static-sensitive devices
or micro-circuitry. Proper packaging and grounding techniques are necessary pre-
cautions to prevent damage. Always take the following precautions:
1. Transport boards in static-safe containers such as boxes or bags.
2. Keep electrostatic-sensitive parts in their containers until they arrive at static-
free stations.
3. Always be properly grounded when touching a sensitive board, component, or
assembly.
4. Store electrostatic-sensitive boards in protective packaging or on conductive
foam.
Grounding Methods
Finnish: laite on liitettävä suoja maadoituskoskettimilla varustettuun pistorasiaan
Norwegian: Apparatet må tilkoples jordet stikkontakt
Swedish: Apparaten skall anslutas till jordat uttag
Guard against electrostatic damage at workstations by following these steps:
1. Cover workstations with approved anti-static material. Provide a wrist strap
connected to a work surface and properly grounded tools and equipment.
2. Use anti-static mats, heel straps, or air ionizers to give added protection.
3. Provide a wrist strap connected to a work surface and properly ground tools and
equipment.
4. Handle electrostatic-sensitive components, boards, and assemblies by the case
or the PCB edge.
5. Avoid contact with pins, leads, or circuitry.