Themis RES-XR4-1U, Installation Manual

Page: 124 / 198

RES-XR4-1U Installation Manual Version 1.5
3-24
Themis Computer
The feature allows the user to configure console redirection settings for a local
machine to communicate with a remote server.
Out-of-Band Management Port
This feature selects a serial port used by the Microsoft Windows Emergency Man-
agement Services (EMS) to communicate with a remote server. The options are
COM1 and COM2.
Terminal Type
This feature allows the user to select the target terminal emulation type for Console
Redirection. Select VT100 to use the ASCII character set. Select VT100+ to add
color and function key support. Select ANSI to use the extended ASCII character
set. Select VT-UTF8 to use UTF8 encoding to map Unicode characters into one or
more bytes. The options are ANSI, VT100,
VT100+ , and VT-UTF8.
Bits Per Second
This item sets the transmission speed for a serial port used in Console Redirection.
Make sure that the same speed is used in the host computer and the client computer.
A lower transmission speed may be required for long and busy lines. The options are
9600, 19200, 57600, and
115200 (bits per second).
Flow Control
This feature allows the user to set the flow control for Console Redirection to pre-
vent data loss caused by buffer overflow. Send a “Stop” signal to stop sending data
when the receiving buffer is full. Send a “Start” signal to start sending data when the
receiving buffer is empty. The options are
None, Hardware RTS/ CTS, and Software
Xon/Xoff.
Data Bits, Parity, Stop Bits
The status of these features is displayed.
3.3.14 ACPI Settings
Use this feature to configure Advanced Configuration and Power Interface (ACPI)
power management settings for your system.
3.3.14.1 ACPI Sleep State
Use this feature to select the ACPI State when the system is in sleep mode. Select S1