Themis RES-XR4-1U, Installation Manual

Page: 44 / 198

1-10
Themis Computer
RES-XR4-1U Installation Manual Version 1.5
Table 1-5. Rear-Panel I/O Connectors
Connector Description
PS/2 Mouse  6-pin mini-DIN connector to attach a PS/2 mouse device (X9DBU / X9SCi-LN4F).
PS/2 Keyboard  6-pin mini-DIN connector to attach a PS/2 keyboard device (X9DBU / X9SCi-LN4F).
Hi-Speed USB 2.0
Serial Ports
 Two 4-pin USB connectors to attach serial devices (X9DBU / X9SCi-LN4F).
 Four 4-pin USB connectors to attach serial devices (X9DRW).
Note: Two additional USB ports can be accessed directly from the motherboard.
Serial Port  9-pin RS-232 connectors COM1.
VGA Graphics Con-
nector
 One 17-pin VGA connector to provide a video display.
Ethernet LAN Ports
 Standard RJ45 connectors for gigabit Ethernet LAN line(s)—LAN 1 and LAN 2.
(plus LAN3 and LAN4 on X9SCi-LN4F)
IPMI Dedicated
Ethernet LAN Port
 Standard RJ45 connector to attach a dedicated IPMI LAN line.
Unit Identifier (UID)
Switch
 A Unit Identifier Switch and two LED indicators are located on the motherboards.
When the UID switch is pressed, both LEDs are turned on (one LED is located at the
rear edge of the motherboard, the other LED is at the front of the motherboard).
Pressing the UID again turns off both LED indicators. The UID indicators provide an
easy identification of a system unit that may be in need of service.
Note: The UID can also be triggered via IPMI.