Themis RES-XR4-1U, Installation Manual

Page: 106 / 198

RES-XR4-1U Installation Manual Version 1.5
3-6
Themis Computer
This feature selects the Power-on state for Numlock key. The options are Off and On
(default).
3.3.1.4 Wait For 'F1' If Error
This forces the system to wait until the 'F1' key is pressed if an error occurs. The
options are Disabled and
Enabled (default)
3.3.1.5 Interrupt 19 Capture
Interrupt 19 is the software interrupt that controls the boot drive function. When this
item is set to Enabled, the ROM BIOS of the host adaptors will “capture” Interrupt
19 at boot and allow the drives that are attached to these host adaptors to function as
bootable drives. If this item is set to Disabled, the ROM BIOS of the host adaptors
will not capture Interrupt 19, and the drives attached to these adaptors will not func-
tion as bootable devices. The options are
Enabled (default) and Disabled.
3.3.2 Power Configuration
3.3.2.1 Watch Dog Function
If enabled, the Watch Dog Timer will allow the system to reboot when it is inactive
for more than 5 minutes. The options are Enabled and
Disabled (default).
3.3.2.2 Power Button Function
If set to Instant_Off, the system will power off immediately upon pressing the power
button. If set to 4_Second_Override, the system will power off when the user presses
the power button for 4 seconds or longer. The options are
Instant_Off (default) and
4_Second_override.
3.3.2.3 Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select Power-Off for the
system power to remain off after a power loss. Select Power-On for the system
power to be turned on after a power loss. Select Last State to allow the system to
resume its last state before a power loss. The options are Power-On, Power-Off and
Last State (default).
3.3.3 CPU Configuration