Themis RES-XR4-1U Installation Manual Download Page 115

Page: 115 / 198

3-15

Themis Computer

3—BIOS Setup Utility

Advanced Setup Configuration

are Enabled and

Disabled

Data Scrambling

Select Enabled to enable data scrambling to ensure data security and integrity. The
options are

Disabled

and Enabled.

Device Tagging

Select Enabled to support device tagging. The options are

Disabled

and Enabled.

Thermal Throttling

Throttling improves reliability and reduces power consumption in the processor via
automatic voltage control during processor idle states. The options are Disabled and

CLTT

(Closed Loop Thermal Throttling).

3.3.5.5 SouthBridge Configuration

This feature allows the user to configure the settings for the Intel

PCH chip.

PCH Information

This feature displays the following PCH information.

• Name: This item displays the name of the PCH chip.

• Stepping: This item displays the status of PCH stepping.

• USB Devices: This item displays the USB devices detected by the BIOS.

All USB Devices

This feature enables all USB ports/devices. The options are Disabled and

Enabled

(If set to Enabled, EHCI Controller 1 and Controller 2 will appear.)

EHCI Controller 1/EHCI Controller 2 (Available when All USB
Devices are set to Enabled)

Select Enabled to enable EHCI (Enhanced Host Controller Interface) Controller 1 or
Controller 2. The options are Disabled and

Enabled

Summary of Contents for RES-XR4-1U







































































































































































































Search results

Summary of Contents for RES-XR4-1U

Reviews:

Related manuals for RES-XR4-1U

Brands by name

Popular brands

Themis RES-XR4-1U, Installation Manual

Search results

Summary of Contents for RES-XR4-1U

Reviews:

Related manuals for RES-XR4-1U

Brands by name

Popular brands