Themis RES-XR4-1U, Installation Manual

Page: 116 / 198

RES-XR4-1U Installation Manual Version 1.5
3-16
Themis Computer
Legacy USB Support (Available when USB Functions is not
Disabled)
Select Enabled to support legacy USB devices. Select Auto to disable legacy support
if USB devices are not present. Select Disable to have USB devices available for EFI
(Extensive Firmware Interface) applications only. The settings are Disabled,
Enabled and Auto.
Port 60/64 Emulation
Select Enabled to enable I/O port 60h/64h emulation support for the legacy USB
keyboard so that it can be fully supported by the operating systems that does not rec-
ognize a USB device. The options are Disabled and
Enabled .
EHCI Hand-Off
This item is for operating systems that do not support Enhanced Host Controller
Interface (EHCI) hand-off. When enabled, EHCI ownership change will be claimed
by the EHCI driver. The options are
Disabled and Enabled.
3.3.6 SATA Configuration
When this submenu is selected, the AMI BIOS automatically detects the presence of
IDE or SATA devices and displays the following items.
3.3.6.1 SATA Port0~SATA Port5
The AMI BIOS displays the status of each SATA port as detected by the BIOS.
3.3.6.2 SATA Mode
Use this feature to configure SATA mode for a selected SATA port. The options are
Disabled, IDE Mode,
AHCI Mode and RAID Mode. The following are displayed
depending on your selection:
IDE Mode
The following items are displayed when IDE Mode is selected:
• SATA (Serial-ATA) Controller 0/SATA (Serial-ATA Controller 1
Use this feature to activate/deactivate and to set the SATA mode for SATA Con-
troller 0 or SATA Controller 1. The options for Controller 0 are Disabled,
Enhanced and
Compatible . The Options for Controller 1 are Disabled and