Themis RES-XR4-1U, Installation Manual

Page: 187 / 198

E-3
Themis Computer
E—Repackaging Instructions
E.3 Instructions for Repackaging
Re-assemble the packaging material about the equipment in accordance with the following instructions
(see
Figure E-2 on page E-4):
1. Inspect the original packing materials for serviceability.
2. Place the foam crush-resistant base layer in the bottom of the box.
3. Place the equipment in the cutout of the bottom layer, unit fitting snugly inside.
4. Place the two top crush-resistant layers, two the rear and front of the RES-XR4-1U. This will
leave a small horizontal gap in which accessories can be placed.
5. Make sure all components of the box are firmly in place, pressing down on the surface area of
the foam to insure proper seating of the material.
6. Seal the top of the box with strong packing tape, wrapping the tape completely around the box,
both lengthwise, and crosswise.
7. Prepare for shipment in accordance with the instructions received from Themis Computer.
Note: Please contact Themis if new packaging material, or shipping instructions
are required. You can reach Themis at +1 (510) 252–0870 Mon—Fri, 8am—5pm
PST, or by Email to support@themis.com.