Themis RES-XR4-1U Installation Manual Download Page 113

Page: 113 / 198

3-13

Themis Computer

3—BIOS Setup Utility

Advanced Setup Configuration

7.2 GT/s, and 8.0 GT/s.

3.3.5.3 DIMM Configuration

This section displays the following DIMM information.

Current Memory Mode

This item displays the current memory mode.

Current Memory Speed

This item displays the current memory speed.

Mirroring

This item displays if memory mirroring is supported by the motherboard. Memory
mirroring creates a duplicate copy of the data stored in the memory to enhance data
security.

Sparing

This item displays if memory sparing is supported by the motherboard. Memory
sparing enhances system performance.

3.3.5.4 DIMM Information

The status of the memory modules specified below will be displayed as detected by
the BIOS.

CPU Socket 1 DIMM Information

P1-DIMMA1/P1-DIMMB1/P1-DIMMC1/P1-DIMMD1/P1-DIMMA2/P1-
DIMMB2/ P1-DIMMC2/P1-DIMMD2

CPU Socket 2 DIMM Information

P2-DIMME1/P2-DIMMF1/P2-DIMMG1/P2-DIMMH1/P2-DIMME2/P2-
DIMMF2/P2-DIMMG2/P2-DIMMH2

Memory Mode

Summary of Contents for RES-XR4-1U







































































































































































































Search results

Summary of Contents for RES-XR4-1U

Reviews:

Related manuals for RES-XR4-1U

Brands by name

Popular brands

Themis RES-XR4-1U, Installation Manual

Search results

Summary of Contents for RES-XR4-1U

Reviews:

Related manuals for RES-XR4-1U

Brands by name

Popular brands