Texas Instruments TMS320C3 Series, User Manual, Page: 81 / 166

Placing Code Sections in Memory Locations
5-17 Using the DSK Assembler
To simulate a linker command file, such as the one used in the TMS320 code
generation tools, you can use a single file to control the starting address of all
sections and then use the .include directive to append all assembly source
files. For example, consider the following build file where three source files are
appended to each other using a common block statement for several .start di-
rectives.
;BUILD.ASM
;–––––––––
.start ”.text”,0x809800 ; Initialize start address for
; each section
.start ”.data”,0x809C00 ;
.start ”sect1”,0x809900 ;
.start ”sect2”,0x809A00 ;
.include ”FILE1.ASM” ; Include source files
.include ”FILE2.ASM” ;
.include ”FILE3.ASM” ;