manualshive.com logo in svg

Texas Instruments TMS320C3 Series, User Manual, Page: 156 / 166

Share
Download
Texas Instruments TMS320C3 Series User Manual Download Page 156

Glossary

C-2

 

C

code-display windows:

Windows that show code, text files, or code-specif-

ic information.

command line:

The portion of the COMMAND window where you can enter

commands.

command-line cursor:

A block-shaped cursor that identifies the current

character position on the command line.

comment:

A source statement (or portion of a source statement) that is

used to document or improve readability of a source file. Comments are
not assembled.

common object file format (COFF):

An object file that promotes modular

programming by supporting the concept of sections.

constant:

A numeric value that can be used as an operand.

cursor:

An icon on the screen (such as a rectangle or a horizontal line) that

is used as a pointing device. The cursor is usually under keyboard con-
trol.

D

debugger:

A windows-oriented software interface that helps you to debug

DSK programs running on a DSK board.

directive:

Special-purpose commands that control the actions and func-

tions of a software tool like an assembler (as opposed to assembly lan-
guage instructions, which control the actions of a device).

disassembly:

Assembly language code formed from the reverse-assembly

of the contents of memory.

DSP:

Digital signal processing.

Summary of Contents for TMS320C3 Series







































































































































































Reviews:

No comments