Texas Instruments TMS320C3 Series, User Manual, Page: 125 / 166

Debugger Commands
7-11 Using the DSK Debugger
Table 7–6. Displaying and Changing Data
To do this Use this command
Display the contents of memory starting at address
addr in the MEMORY window MEM addr
Modify memory at address addr MM addr
Fill
leng locations of memory starting at address addr
with value val. If val is expressed in a floating-point
format (with a decimal point), it will be converted into
a TMS320 floating-point format.
MM
addr leng val
Display assembly language code starting at address
addr in the DISASSEMBLY window DASM
addr
Display extended-precision registers in 40-bit hexade-
cimal format in the register window REG40
Display extended-precision registers in floating-point
decimal format in the register window FLOAT
Modify reg register in the CPU REGISTER window
with the value from expression. For example
PC = 0x809800
R0 = 1.34
reg = expression
Table 7–7. Managing Breakpoints
To do this Use this command
Set a breakpoint at address addr SB addr
Clear a breakpoint at address addr CB addr
Clear all the breakpoints CB
Display a list of all the breakpoints that are set DB
Table 7–8. Loading Programs
To do this Use this command
Load an object file LOAD filename
Load symbols SLOAD filename
Load binary only BLOAD filename
Clear symbols SCLEAR