Texas Instruments TMS320C3 Series, User Manual, Page: 126 / 166

Debugger Commands
7-12
Table 7–9. Performing System Tasks
To do this Use this command
Reset the DSK RESET
Quit or exit the debugger QUIT or EXIT
Enter the DOS shell and optionally execute the ex-
pression. Enter EXIT to return to debugger DOS ( expression to Run)
Enter the DOS shell and execute the editor to edit
filename. (If no filename is given, the name of the
presently loaded file is used). EDIT
filename
Enter the DOS shell and execute the DSK assembler
to assemble
file
dsk3a filename.asm