Texas Instruments TMS320C3 Series, User Manual, Page: 124 / 166

Debugger Commands
7-10
7.5 Debugger Commands
The following tables provide a summary of the debugger function keys and
commands.
Table 7–3. Command-Line Editing
To do this Use this command
Move the cursor to the beginning of the command line
HOME
Move the cursor to the end of the command line
END
Delete the character to the left of the cursor
DEL
Delete the character to the right of the cursor
SHIFT END
Move the cursor to the left
→
Move the cursor to the right →
Table 7–4. Command-Line Buffer Manipulation
To do this Use this command
Recall the last command typed ↑
PAGE UP
or
Recall the first command in the command-line buffer
PAGE DOWN
or
↓
Reexecute the last command typed
TAB
Table 7–5. Running Programs
To do this Use this command
Step through the instructions one at a time (single-
step) SS
Execute n instructions XN n
Single-step through the instructions until you reach
address
addr
XG addr
Execute the program until a breakpoint is encoun-
tered RUN
Execute the program and ignore breakpoints (run-
free) RUNF