manualshive.com logo in svg

Texas Instruments TMS320C3 Series, User Manual, Page: 21 / 166

Share
Download
Texas Instruments TMS320C3 Series User Manual Download Page 21

 What You Need

2-3

  Installing the DSK Assembler and Debugger

Board

DSK circuit board

Cable

Pass-through parallel printer port cable

Optional hardware

An EGA- or VGA-compatible graphics display card and monitor.

Miscellaneous
materials

Blank, formatted disks

Software checklist

Operating system

MS-DOS

 or PC-DOS

 (version 5.0 or later), Windows

t

 or

OS/2

t

Files

dsk3a.exe is an executable file for the DSK assembler. Executing
dsk3a.exe produces all the files needed to use the DSK.

dsk3d.exe is an executable file needed for running the DSK debug-
ger interface.

Miscellaneous files

Other files are included in your DSK package, such as sample
source files and additional documentation. You can find a brief de-
scription of these files in the Readme file included on your disk. Be
sure to check the Readme file for the latest information on software
changes and DSK operation.

Note:

Other applications for the DSK can also be downloaded from the TMS320
BBS or Internet FTP site. See the 

If You Need Assistance subsection on

page vii, for the Internet address.

DSK module connections

You need a parallel printer port cable to connect your PC to your DSK board.
The DSK board is designed with a DB25 parallel printer port connection
mounted on the board.

Summary of Contents for TMS320C3 Series







































































































































































Reviews:

No comments