Texas Instruments eInfochips TMDXEVM6657L, Technical Reference Manual, Page: 2 / 91

Technical Reference Manual TMDXEVM6657L
SPRUHG7 - Revised August 2012
TMDXEVM6657LE
Page 2 / 90
EVALUATION BOARD/KIT/MODULE (EVM) WARNINGS, RESTRICTIONS AND DISCLAIMER
Not for Diagnostic Use: For Feasibility Evaluation Only in Laboratory/Development Environments
The EVM may not be used for diagnostic purposes.
This EVM is intended solely for evaluation and development purposes. It is not intended for use and may not be
used as all or part of an end equipment product.
This EVM should be used solely by qualified engineers and technicians who are familiar with the risks associated
with handling electrical and mechanical components, systems and subsystems.
Your Obligations and Responsibilities
Please consult the EVM documentation, including but not limited to any user guides, set up guides or getting
started guides and other warnings prior to using the EVM. Any use of the EVM outside of the specified operating
range may cause danger to the users and/or produce unintended results, inaccurate operation, and permanent
damage to the EVM and associated electronics. You acknowledge and agree that:
You are responsible for compliance with all applicable Federal, State and local regulatory
requirements (including but not limited to Food and Drug Administration regulations, UL, CSA, VDE, CE,
RoHS and WEEE,) that relate to your use (and that of your employees, contractors or designees) of the EVM
for evaluation, testing and other purposes.
You are responsible for the safety of you and your employees and contractors when using or handling the
EVM. Further, you are responsible for ensuring that any contacts or interfaces between the EVM and any
human body are designed to be safe and to avoid the risk of electrical shock.
You will defend, indemnify and hold TI, its licensors and their representatives harmless from and against any
and all claims, damages, losses, expenses, costs and liabilities (collectively, “Claims”) arising out of or in
connection with any use of the EVM that is not in accordance with the terms of this agreement. This
obligation shall apply whether Claims arise under the law of tort or contract or any other legal theory, and
even if the EVM fails to perform as described or expected.
Warning
The EVM board may get very hot during use. Specifically, the DSP, its heat sink and power supply circuits all
heat up during operation. This will not harm the EVM. Use care when touching the unit when operating or
allow it to cool after use before handling. If unit is operated in an environment that limits free air flow, a fan
may be needed.