TESTO 6351, Instruction Manual

Page: 47 / 84

4 Transmitter
47
4.5.1. Status messages
Status messages show the current operating status of the testo
6351.
Message Display Description
02506 Sensor
initialization Message appears while the
transmitter is starting up. If the
message disappears, the
transmitter is ready for operation.
01D19 Service plug The Mini-DIN socket is connected
to: the USB adapter for P2A
software, the adjustment adapter
or the service plug (is not
recorded/no number)
00300 New limit value The limit value has been changed
or shifted
00301 Scaling changed The scaling has been changed
00117 Adjustment DeltaP An n-point adjustment was
performed.
02104 Analog adjustment An analog adjustment has been
made
00530 Change solenoid
valve The solenoid valve should be
changed
00500 Transmitter reset The transmitter was reset to the
factory settings and is restarted.
0052F Reset Min/Max Resets all saved Min/Max values
for all channels
00503 Reset device to
fact A factory reset of the transmitter
was performed
00307 User Setting
Change User Setting Change: General
settings were changed for the
transmitter.