TESTO 6351 Instruction Manual Download

Page: 69 / 84

5 Parameterizing, adjusting and analyzing software (P2A software)

- The

Properties of <Instrument type> <Serial number>

dialogue is opened with the

Test/analyze transmitter



Mark transmitter test.

- Current operating hours are shown.
3.



Confirm control query to perform the reset.

- The values are reset to the customer-specific factory settings.
4.



Click on

[OK]

[Cancel]

to close the dialogue.

5.3.3.3.

Testing analog output

✓

The required instrument file is marked.



Click on

[Test/analyze transmitter]

- The

Properties of <Instrument type> <Serial number>

dialogue is opened with the

Test/analyze transmitter



Mark channel and test values.

Field/button

Explanation

Transmitter test

Check the analog outputs (see
4.4.6.4. Testing functionality of analog
outputs).

Current reading

Readings are updated every second.

Unit

Unit according to the type of analog
output.

Summary of Contents for 6351





















































































Search results

Summary of Contents for 6351

Reviews:

Related manuals for 6351

Brands by name

Popular brands

TESTO 6351, Instruction Manual

Search results

Summary of Contents for 6351

Reviews:

Related manuals for 6351

Brands by name

Popular brands