TESTO 6351 Instruction Manual Download

Page: 58 / 84

5 Parameterizing, adjusting and analyzing software (P2A software)

[Change parameterization]

see 5.3.2.1. Changing

instrument/parameter file.

[Test/analyze transmitter]

see 5.3.3. Chapter Analyzing/testing

the transmitter.

[Adjusting the transmitter]

see 5.3.4. Chapter Adjusting the

transmitter.

[Transmitter history]

see 5.3.5. Transmitter history.



File information:

Status

Shown in the window

An instrument file is
selected

Type, serial number, firmware version of the
instrument.

A parameter file is
selected

Type, serial number and firmware version of
instrument for which the parameter file was
created.

Connection status

Green = connection is active
Red = connection is inactive



Status bar: Shows the current status when editing via the menu
bar.

5.3.2.

Editing instrument/parameter file

5.3.2.1.

Changing instrument/parameter file

✓

The desired instrument/parameter file is marked.



Click on

[Change parameterization]

- The

Properties of <Instrument type> <Serial number>

dialogue is opened with the

Change parameterization

If the parameters were transmitted from other parameter files into
the instrument file, a message is shown with which you can
transmit the new parameters to the connected instrument using

[Yes]

> If the parameters should not be transmitted, click on

[No]

Summary of Contents for 6351





















































































Search results

Summary of Contents for 6351

Reviews:

Related manuals for 6351

Brands by name

Popular brands

TESTO 6351, Instruction Manual

Search results

Summary of Contents for 6351

Reviews:

Related manuals for 6351

Brands by name

Popular brands