TESTO 6351 Instruction Manual Download

Page: 71 / 84

5 Parameterizing, adjusting and analyzing software (P2A software)

5.3.3.4.

Testing switch output relays 1 to 4

✓

The required instrument file is marked.



Click on

[Test/analyze transmitter]

- The

Properties of <Instrument type> <Serial number>

dialogue is opened with the

Test/analyze transmitter



Mark

Relay tests

and test the values.

Field/button

Explanation

Test the relay function (see 4.4.6.4. Testing
functionality of relay outputs).

[Activate relay n]

Close contact.
A warning informs that the value is being
transmitted to a connected PLC, external
display, etc. in the event of existing cabling.

[Deactivate relay
n]

Open contact.
A warning informs that the value is being
transmitted to a connected PLC, external
display, etc. in the event of existing cabling.



Click on

[OK]

[Cancel]

to close the dialogue.

- The analog output returns to Measuring Mode again.

Summary of Contents for 6351





















































































Search results

Summary of Contents for 6351

Reviews:

Related manuals for 6351

Brands by name

Popular brands

TESTO 6351, Instruction Manual

Search results

Summary of Contents for 6351

Reviews:

Related manuals for 6351

Brands by name

Popular brands