7 Maintaining the product
143
Do not press any other keys on the Saveris base.
6.
Confirm software message
For backup, the base must be
restarted
with
[OK]
.
7.
Select the directory to which the backup file should be saved.
8.
Click on
[Save]
.
- *bi2 file with backup data is saved.
The stored data can only be imported to a Saveris base
with the same firmware status. The memory capacity of the
target base must be larger than or equal to the source
base. For the memory size, see the
Select language
window.
To transfer the saved data to a Saveris base, please
contact Customer Service.
Pos: 173 /TD/Produkt instand halten/testo Saveris/Base neu starten @ 12\mod_1339775093729_79.docx @ 130896 @ 2 @ 1
Saveris
7.5.
Restarting the Saveris base
Only carry out these steps if they will resolve the problem
indicated by the relevant alarm message, see
Saveris base
alarm messages, page
172
.
✓
The Saveris base display shows
Info Base
.
1. Press
[ESC]
twice in rapid succession.
-
Shutdown
appears on the display and the Saveris base
switches off.
2. Press
[ESC]
.
- The Saveris base is started.
