7 Maintaining the product
131
Pos: 165 /TD/Überschriften/7. Produkt instand halten @ 0\mod_1173789831362_79.docx @ 397 @ 1 @ 1
7
Maintaining the product
Pos: 166 /TD/Produkt instand halten/testo Saveris/Wartung @ 9\mod_1309853188816_79.docx @ 81423 @ 3 @ 1
7.1.
Maintenance
If possible, create a database backup of the current system
before carrying out any system maintenance, see
Testing
the system, page
78
.
The stored Saveris base data can only be imported to a
Saveris base with the same firmware status. The memory
capacity of the target base must be larger than or equal to
the source base. For the memory size, see the
Select
language
window.
Maintenance includes:
• Registering/deregistering
components (calibration outside the
current system)
• System
reboot
• Firmware and software update
• Changes in alarm management.
The larger a Saveris system, the more important it is to
carry out a random system test after any
maintenance/major intervention or configuration, see
Testing the system, page
78
.
Pos: 167 /TD/Produkt instand halten/testo Saveris/00 Ersatz von Komponenten @ 0\mod_1188476464890_79.docx @ 2909 @ 2 @ 1
7.2.
Replacement of components
You can shut down a component – probe, converter or router – at
any time because this is temporarily not in use or to replace it with
a new component, for example, in the event of a defect.
In the event of a replacement of the Saveris base,
a new project must be created. Please contact our
software hotline if required ([email protected]).
Pos: 168 /TD/Produkt instand halten/testo Saveris/01 Komponenten entfernen @ 0\mod_1193737448921_79.docx @ 5643 @ 3 @ 1
7.2.1.
Deleting components
1.
Under
Start
|
All Programs
|
Testo
click on
Testo Saveris
Startup Wizard
.
- The welcome dialogue of the startup wizard is shown.
