6 Using the product
127
Designation Explanation
data
of the probe from the adjustment
software.
Display
adjustment data
Button for displaying the adjustment data
of the probe that has already been
imported.
Pos: 161 /TD/Produkt verwenden/testo Saveris/09 Einstellungen System/07 Analogkoppler @ 4\mod_1248704611882_79.docx @ 46423 @ 2 @ 1
6.9.5.
Analog coupler
Via this menu item you can change the power supply of the analog
coupler or reset a sum channel, for example.
With the radio analog coupler U1 the same information is shown
under the
Radio probe setting
entry as with the radio probe (see
Settings for the radio probe
page 123).
With the Ethernet analog coupler U1E the same information is
shown under the
Ethernet probe setting
entry as with the
Ethernet probe (see
Ethernet probes
page 125).
1.
Open the
Radio probe
|
Ethernet probe > Scaling
entry.
- The settings of the selected probe are shown in the display
range.
Designation Explanation
Connection
Output signal of the transmitter.
Display
Display range of the physical unit.
