7 Maintaining the product
136
5. Click on
[Add stationary zone]
.
6. Open the selection list via button and select the zone to
which the probe should be assigned.
7. Click on
[Next >]
.
8. Click in the
TE type
field and enter the thermocouple element
type (
K
,
J
,
T
or
S
) if this information is necessary for the device.
9. If required, change the default values in fields
Probe name
and
Channel name
.
10. If required, import adjustment data for the individual probes:
Click on
[Import adjustment data]
.
11. Click on
[Next >]
.
- The settings for the measuring cycle are displayed.
12. Enter
Measuring cycle
and define its
Unit
.
The measuring cycle determines the intervals at which
a new measured value is saved in the Saveris base.
Possible settings for the unit:
•
sec
(second)
•
min
(minute)
•
h
(hour).
The smallest transfer rate for radio probes is one minute.
