6 Using the product
101
Creating a new group
1. Right-click on component, then click on
[Insert into new
group]
.
-
A new alarm group is created.
2. Overwrite the default names in
Group alarm settings
.
Move to…
1. Right-click on component, then click on
[Move to …]
.
-
A selection of available alarm groups is displayed.
2. Click on required alarm group.
-
The component is assigned to the selected alarm group.
Remove from group
1. Right-click on component, then click on
[Remove from group]
.
-
The component is removed from the assigned alarm group.
Delete group
1. Right-click on component, then click on
[Delete this group]
.
-
The assigned alarm group is deleted, all components that were
assigned to this group are now without an alarm group.
Apply to all
1. Right-click on component, then click on
[Apply to all]
.
-
The alarm group assigned to this component is applied to all
other components.
6.4.3.2.
Channels
Any configuration changes are only transferred to the
probe/base once you have exited the
Alarm management
menu!
You should therefore exit the
Alarm management
menu
after editing.
1. Click on
Alarm management
in the navigation area.
- The data area shows the sub-menus
Base alarm settings
,
Component alarm settings, Channel alarm settings
.
2. Click on
Channel alarm settings
.
- The probe alarm settings are shown in the display area.
