6 Using the product
103
Designation Description
Group alarm
settings
Enter the group name.
System settings
Alarm conditions:
settings for lower limit
delay [Measurements], upper limit delay
[Measurements] and trigger
acknowledged alarms after [min]
Alarm output Saveris Base:
settings for
relays, audible signal and light signal.
[Apply entries]
Saves the alarm settings of an alarm
group.
[Print]
Creates a file containing a summary of
the alarm settings for probes and the
base.
Activate/deactivate
all
Activates all available alarm settings.
Creating a new group
1. Right-click on component, then click on
[Insert into new
group]
.
-
A new alarm group is created.
2. Overwrite the default names in
Group alarm settings
Group
selection list
.
Move to…
1. Right-click on component, then click on
[Move to …]
.
-
A selection of available alarm groups is displayed.
2. Click on required alarm group.
-
The component is assigned to the selected alarm group.
Remove from group
1. Right-click on component, then click on
[Remove from group]
.
-
The component is removed from the assigned alarm group.
Delete group
1. Right-click on component, then click on
[Delete this group]
.
-
The assigned alarm group is deleted, all components that were
assigned to this group are now without an alarm group.
