7 Maintaining the product
134
> After deleting a probe, briefly press the Connect button on the
rear of the probe so that the probe no longer attempts to send
measurement data.
Pos: 169 /TD/Produkt instand halten/testo Saveris/02 Komponenten hinzufügen @ 11\mod_1325774414329_79.docx @ 103843 @ 3 @ 1
7.2.2.
Adding new components
With the subsequent addition of a new component, it is
possible that the measuring cycle is not synchronous
with that of the components already present.
This results in the readings seeming to be missing in
the table view if readings are not input from all probes at
a point in time.
1. Register new probe on the Saveris base; see
Connecting radio
probe, page
37
.
2. Start the testo Saveris startup wizard.
- The startup wizard is opened.
3. Click on
[Next >]
.
-
The
Commission new probe
dialogue box is displayed.
