Instruction Manual for TESA CLINOBEVEL 3
11
3 DISPLAY
3.1 Scaling of the
display
For an optimal use of the graphic display, you have various options for scaling.
With the linear scaling the display precision remains constant over the full range. With the
keys
the resolution can be changed. Thus, also the range being
displayed will be changed. The following ranges can be selected, whereas certain
restrictions may be possible depending on the display type: 60°, 45°, 20°, 10°, 5°, 2°, 1°,
30', 12'. The range of 12' in the bar graph is the highest possible resolution of the
instrument, i.e. 5" for each pixel.
In the TESA CLINOBEVEL 3
High Precision
the following ranges can be selected:
1°, 30', 12', 6', 3', 1'.
With the logarithmic scaling the display precision around Zero is the highest and it is
reduced continuously with higher inclination values. Around Zero the resolution
corresponds to the unit selected.
In the adjustments of the instrument you can switch between linear and logarithmic scaling.
Using the key
select the menu point
[Options]
and
confirm
your
selection
with
. Select now [Logscale] and confirm
with
.
Switch the logarithmic scaling on or off using the keys
. The display will show the
requested state of the instrument. Confirm with the key
.
The measuring instrument returns to the measuring mode. If the logarithmic scaling is
enabled, the symbol "LOG" will appear below the graph.
3.2 Display types
The display type can be selected in the menu "display".
Using the key
select the menu point [display] and confirm your selection with
.
Select the required display type using the keys
and confirm your selection with
the key
.
The measuring instrument returns to the measuring
mode
The following display types are available in the TESA CLINOBEVEL3 :
Numeric display