![background image](http://html.mh-extra.com/html/tesa/05330210/05330210_instruction-manual_1090539008.webp)
Instruction Manual for TESA CLINOBEVEL 3
8
2.5 Key functions
ON/MODE - Key
Function - 1 -
To switch the TESA CLINOBEVEL 3 on. When for starting the key
is pressed, a grey picture will appear on the screen
and all LEDs will be illuminated. After releasing the key, the TESA
CLINOBEVEL 3 is switching to the measuring mode. The current
inclination is displayed in the mode and unit which was saved last. In
case of an error the respective error message is shown in the display.
The instrument will automatically shut of 60 minutes after the last key
operation.
If the key
is pressed
for more than 10 seconds
the
LEDs start blinking and
the automatic off function is deactivated
.
Exception
: If the TESA CLINOBEVEL 3 is powered from an external
power supply, the automatic off function is deactivated, and the
instrument will remain on.
Function - 2 -
To switch off, press the key
more than 3 seconds
,
until the display disappears.
Function - 3 -
With the key
you open the menu selection. Pressing
the key repeatedly will move the cursor down to the desired position.
Function - 4 -
While setting a value with the key
the default value
can be recalled.
ENTER – key
Function - 1 -
The key
is used to confirm a chosen function or to
save a value entered.
Function - 2 -
In the function "
REL ZERO
" or "
ABS ZERO
" the measuring can be
started, or an ongoing measurement can be finished by pressing the
key
.
REL ZERO - key
Function - 1 -
The key
serves for setting the actual inclination as
the relative Zero.
SEND/ESC- key