Instruction Manual for TESA CLINOBEVEL 3
7
2.3 Overview
keyboard and
display
ON/OFF
or
select menu
confirm selection
or
save entry
send current inclination
or
Unfreeze measuring value and send HOLD-
inclination
or
escape from the menu
ZOOM IN / ZOOM OUT
or
next /previous option
Freeze measuring value
Use current inclination as relative Zero
2.4 How to switch the
instrument ON and
OFF
To switch ON
Keep the key
(AN / MODUS) pressed
until the display and all LEDs are lit and release the key.
The instrument will automatically shut off 60 minutes
after the last key operation.
The instrument carries out a short function test and
establishes connections to other instruments, if any had
been available.
The instrument changes into measuring mode. The settings, which were used prior to
switching the instrument off, are reloaded.
The TESA CLINOBEVEL 3 features an automatic shut off mechanism. In normal
mode the instrument is automatically switched off 60 minutes after the last key
operation. This automatic shut OFF function can be deactivated with the ON
sequence described below or by using an external power supply.
If you keep the
key pressed
for more than 10 seconds
, the
automatic OFF function is deactivated. This is indicated by blinking LEDs.
To switch OFF:
Keep the
key pressed
longer than 3 seconds
until the display disappears.
All settings are kept and will be reloaded again next time the instrument is switched on.