![background image](http://html.mh-extra.com/html/tesa/05330210/05330210_instruction-manual_1090539024.webp)
Instruction Manual for TESA CLINOBEVEL 3
24
The
value
displayed
is “0”
and represents the position of
the reference defined.
The complete procedure is he following:
Put the measuring instrument on the reference surface.
The display shows the value -7‘00‘‘. This corresponds to
the absolute inclination of the reference surface.
Select the function [REL ZERO] and confirm this selection with
.
On the display the position of the instrument for the
measurement will be shown.
With the key
you can at this stage open
the manual entry in order to enter a reference value
defined by yourselves.
Set the TESA CLINOBEVEL 3 to the correct position and
press the key
to read the value.
Alternatively, the measuring can also be started using the
remote control.
During the measurement the display will graphically
show the current measurement.
Complete the measurement with the key
or with the remote control. After 15 seconds the measuring
value will automatically be read.
On the screen the display for the actual measurement will
appear now under consideration of the ZERO-OFFSET.