Instruction Manual for TESA CLINOBEVEL 3
22
7.5 HOLD function
The key function
(measuring value frozen) can be applied in all measuring
modes.
Put the TESA CLINOBEVEL 3 on a stable support. Press
now the key
. While the TESA
CLINOBEVEL 3 is waiting for a valid measuring value the
display will show graphically the measuring values read in
the form of a shoal of points. As it is practically impossible
to obtain a valid measuring value during manipulation, the
instrument can be set to the final position even after
activating the key.
Complete the measurement with the key
or with the remote control. After 15 seconds the measuring
value will automatically be read.
By pressing the key
again, a new valid
measuring value will be read.
With the key
the "frozen" measuring value will be transmitted via the "
RS485
"
port to a connected PC/Laptop with an RS232 interface. At the same time the instrument will
return to the measuring mode.
The function SEND can also be initiated from the PC/Laptop connected by sending "P" (as a
letter) via the RS-232 port.
7.6 Selection of the
filter under
different
measuring
conditions /
FILTER
A number of different predefined filters can be selected.
Description of the different filter types:
•
FILTER 1:
No filtering, no integration of the measuring values (
T
const. =
0.33Sek.)
•
FILTER 2:
Floating average of 3 measuring values (
T
const. = 1 sec.)
•
FILTER 3:
Floating average of 15 measuring values (
T
variable = 0.33 … 5 sec.)
•
FILTER 4:
Floating average of 6 measuring values (
T
const. = 2 sec.)
•
FILTER 5:
Floating average of 15 measuring values (
T
const. = 5 sec.)
T
: Response time when changing the position. For filter 3 the actual change of the measuring
value will define the number of values to be used for calculating the floating average. With a
considerable change the number of values will be reduced with minute fluctuations the number
will be increased.
Filter type 3 is the factory setting.
Using the key
select the menu point
[FILTER] and confirm your selection with
.
Using the keys
, you can now select
the filter type desired and then confirm it with
.