Terumo Titan T401231, Manual

Page: 7 / 128

7
Flat area
on Sleeve
Slide sleeve forward to
insert/remove attachments
Stabilizer Arm shaft
configuration
Shaft Quick Connect of
Stabilizer Attachment
Detent
Figure 2 – Attachment of the Titan™ Stabilizer Attachment to
the Stabilizer Arm
• For connection to the Terumo Stabilizer Arm ball configuration:
Grasp the sleeve of the arm and press the ball of the attachment
into the collet of the Stabilizer Arm (see Figure 3). Check for
secure connection.
NOTE: Ensure that the sleeve is grasped during attachment insertion.
Failure to grasp the sleeve may result in an inability to insert the
attachment.
Stabilizer Arm ball
configuration
Collet
Sleeve (grasp during
attachment insertion)
Do NOT hold here during
attachment insertion
Ball Quick Connect
Ball Quick Connect of
Stabilizer Attachment
Figure 3 – Attachment of the Titan™ 360 Stabilizer Attachment to
the Stabilizer Arm ball configuration