Terasic Altera DE3 User Manual Download Page 60

Page: 60 / 117

DE3 User Manual

iii.

Disable all the I/O Groups except for I/O Group A.

iv.

Click OK button to complete the configuration.

Figure 4.19. The DE3 Configuration window

Complete the project:

Click Generate to complete this project.

Add custom logic design:

Users can include their own logic design to the top-level file generated by

DE3 System Builder and compile the project to generate the SRAM object

files (.sof).

Configure the FPGA device:

If the generated project is configured to FPGA device for the first time, please

make sure all the boards are removed from the DE3 board before powering up.

ii.

Configure the FPGA device via the USB cable.

iii.

Check the status of I/O Group indication LEDs to see if the voltage level of

I/O Group is correct.

iv.

Power off the DE3 board and plug the custom-made board to the GPIO 0(J14)

of the DE3 board.

Configure the FPGA device via the USB cable again and check the user logic

function for the custom-made board.

Summary of Contents for Altera DE3






















































































































Search results

Summary of Contents for Altera DE3

Reviews:

Related manuals for Altera DE3

Brands by name

Popular brands

Terasic Altera DE3, User Manual

Search results

Summary of Contents for Altera DE3

Reviews:

Related manuals for Altera DE3

Brands by name

Popular brands