Terasic Altera DE3 User Manual Download Page 52

Page: 52 / 117

DE3 User Manual

4.4

Creating My First DE3 Project

This section provides an example on how to generate a Quartus II project to turn on LEDs of the

DE3 board via the DE3 System Builder. The detail procedures are described below:

Execute DE3_System_Builder.exe on the host computer.

Add a DE3 board :

Select a DE3 board’s icon in the Board Selection field and click Add button.

Configure the DE3 I/O interface:

After the above is completed, a DE3 Configuration window will pop up. Please follow

Figure 4.10

to modify the configuration as described below:

Change the Board Name from DE3 to MY_FISRT_DE3_PROJECT.

ii.

Make sure the FPGA type is same as user’s DE3 board.

iii.

Disable all the components and IO Group except the LED.

iv.

Click OK button to complete the configuration.

Figure 4.10. The DE3 Configuration window

Complete the project:

Click Generate to complete this project. The DE3 System Builder will generate the

corresponding Quartus II project files under the directory specified by users.

Summary of Contents for Altera DE3






















































































































Search results

Summary of Contents for Altera DE3

Reviews:

Related manuals for Altera DE3

Brands by name

Popular brands

Terasic Altera DE3, User Manual

Search results

Summary of Contents for Altera DE3

Reviews:

Related manuals for Altera DE3

Brands by name

Popular brands