40
T500 9015504 01-2018
MAINTENANCE
MACHINE JACKING
FOR SAFETY: Before leaving or servicing machine,
stop on level surface, turn off machine, remove key
and set parking brake if equipped.
Use the designated locations to jack up the machine
for service. Empty the recovery and solution tanks and
position the machine on a level surface before jacking.
FOR SAFETY: When servicing machine, jack
machine up at designated locations only. Support
machine with jack stands. Use jack or hoist that
will support the weight of the machine.
TRANSPORTING MACHINE
When transporting the machine by use of trailer or
truck, carefully follow loading and tie-down procedure.
1. Drain tanks, raise the scrub head and the remove
squeegee assembly.
2. Carefully load machine in trailer or on truck.
FOR SAFETY: When loading/unloading, use a ramp
that can support the machine weight and operator.
FOR SAFETY: When loading/unloading, the
machine may only be operated on gradients up to
2%.
3. Once loaded, position the front of the machine up
against the front of the trailer or truck. Lower the
scrub head, turn key off and set parking brake, if
equipped.
4. Place a block behind each wheel.
5. Using tie-down straps, secure the machine using
the four tie-down brackets located on the machine
frame. It may be necessary to install tie-down
brackets to the fl oor of your trailer or truck.
NOTE: When transporting machine in an open truck or
trailer, secure recovery tank lid.
ATTENTION: Do not use control console area or
accessory storage rails for tie-down locations,
damage may occur.
Summary of Contents for t500
