Snappi Seat Standalone User Manual
Document No: 053-07 v5
Page 37 of 54
January 2019
Snappi Seat Standalone User Manual.doc
Fig 6.2.7
Once all the parts have been removed from
the ends of the frame bars, carefully slide
the frame bars out of the stitched pocket in
the sun hood cover (see fig 6.2.7).
To wash the cover, wash on its own at 30
degrees on a synthetic cycle. For brightly
coloured fabrics include a colour catcher to
help prevent the colour running. Do not dry
clean or bleach the cover.
Allow the cover to dry naturally. Do not iron
or tumble dry.
When the cover is completely dry, re-
assemble the sun canopy following the
reverse of these instructions. Note due to
the design of the cover the adjustor parts
will only correctly fit one way round.
Fig 6.2.8
6.3: Grip Rail
– not suitable for rearward facing on Snappi Chassis
(can be used rearward with the Swirl).
The grip rail is provided with two
thumbscrews for fitting to the pushchair (See
Fig 6.3.1).
Important:
The grip rail is not designed as a
safety barrier. Suitable harnessing must
always be used.
Fig 6.3.1
