Snappi Seat Standalone User Manual
Document No: 053-07 v5
Page 28 of 54
January 2019
Snappi Seat Standalone User Manual.doc
Fig 3
On the back of each mounting pole, will be
1 button clip, as shown in Fig 3, left.
To fit the sunhood, stand behind the seat
and slide the mounting poles into the
receiver brackets with the button clips facing
you. Pressing both button clips, simply slide
the hood down into the sunhood brackets to
the position shown in Fig 4, right.
Fig 4
Fig 5
There are 2 positions you can lock the
button hole into. Fig 4 shows the button hole
fitted in the top position. However, if
needed, the hood can be dropped to the
lower hole position. You can see both hole
positions in Fig 5, left. To do this, push in
both button clips and slide the hood down
until it locks into the lower position.
Button Clip
