Snappi Seat Standalone User Manual
Document No: 053-07 v5
Page 23 of 54
January 2019
Snappi Seat Standalone User Manual.doc
5.6 Fitting a Butterfly/Chest Harness or H-Belt Harness (Optional)
The Butterfly harness comprises a padded
section that sits against
the user’s chest, two
shoulder and two bottom straps. Either the
shoulder or the bottom straps are locked in a
position to suit the user and then final adjustment
is made on the opposite straps.
The harness is designed to provide comfortable
postural support for the user.
Fig 5.6.1
Alternatively an H-Belt hanress is available, which
comprises 4 padded straps that join together with
a quick release buckle to provide easy open and
release of the harness.
Important:
The harnesses fitted are for postural
support only and must not be used as a vehicle
harness.
Fig 5.6.2
Fig 5.6.3
If the Snappi Seat was not originally
supplied with either harness then you
will need to purchase and fit the
relevant cam buckle fixing points (Fig
5.6.3) to the rear of the seat.
•
For the butterfly harness
purchase 20mm cam buckles.
•
The H-Belt Harness purchase
25mm cam buckles.
